Permatex 24206 Medium Strength Threadlocker Blue, 2.5 ml

Description

Permatex 24206 Medium Strength Threadlocker Blue, 2.5 ml
PERMATEX® Medium Strength Threadlocker BLUE is a medium strength anaerobic threadlocking material, which cures between engaged threads to form a unitized assembly that resists virtually all leakage, shock and vibration. The product is a single component, anaerobic liquid that cures when confined in the absence of air between close fitting metal surfaces. Ideal for all 1/4" to 3/4" diameter nut and bolt assemblies. Excellent chemical resistance with a temperature resistance range of -54 degree Celsius to +150 degree Celsius (-65 degree Fahrenheit to +300 degree Fahrenheit). Easily removable with hand tools for servicing requirements. OEM Specified. NSF White Book registered.
Size: 2.5 ml
OEM specified
All-purpose, medium strength threadlocker
Ideal for all nut and bolt applications 1/4" to 3/4" (6 mm to 20 mm)
Eliminates need for stocking expensive lock nuts and lock washers
Locks and seals while preventing parts loosening due to vibration
Protects threads from corrosion
Removable with hand tools for easy disassembly
Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N)
Bottle
Carded.
Suggested Applications:
Automotive
Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs.
Motorcycle
Handlebar brackets, mirror fixtures, shock bolts, rear fender nuts, small fastener nuts.
Marine
Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs.
Heavy Duty
Case cover bolts, axle housing bolts, oil seal retainer bolts, axle shaft flange bolts, differential drain plugs, fuel tank fasteners, lug nuts, windshield wiper nuts, gear shift knobs, door hardware, running light screws, horning mounting.
Benefits:
Improved Reliability
Eliminates vibration issues
Seals against leakage
Prevents rusting of threads
Cures without cracking or shrinking
Can be adjusted or disassembled.
Easy Application:
No mixing
No curing outside of joint
Thixotropic: resists dripping from threads during assembly
No torque compensation required during assembly.
Typical Applications:
Prevents loosening and leakage of threaded fasteners. Particularly suitable for applications such as:
Belt tensioner bolts
Pulley bolts
Cup and core plugs
Fan hub bolts
Visor mount bolts
Starter mounting bolts
Alternator Mounting Bolts
Intake Manifold Bolts
Valve Cover Bolts
Vacuum Adjustment Screws
Oil Pan Bolts
Axle Cover Screws
Drive Shaft Bolts
Disc Brake Caliper Bolts
Gearshift Knobs.
Directions For Use:
For Assembly
Clean all threads (Bolt and Hole) with a cleaning solvent such as Permatex® Brake and Parts Cleaner and allow to dry.
Determine if the threads to be bonded are Active or Inactive Metals. If material is an Inactive Metal, spray all threads with Permatex® Surface Prep and allow 30 seconds to dry. Priming is not required if the material is an Active Metal. If unknown, it is always best to use the primer.
Shake the product thoroughly before use.
To prevent the product from clogging in the nozzle, do not allow the tip to touch metal surfaces during application.
For Thru Holes, apply several drops of product onto the bolt at the nut engagement area.
For Blind Holes, apply several drops down the female threads into the bottom of the hole. As threads are engaged, compressed air forces the product upwards into the threads.
Assemble and tighten as usual. When tightening to established torque values, torque compensation is not required.
For Cleanup
Residual liquid films and/or fillets outside the joint are readily soluble in Permatex® Brake and Parts Cleaner.
Cured product can be removed with a combination of soaking in Permatex® Gasket Remover and mechanical abrasion such as a wire brush.
For Disassembly
Remove with standard hand tools.
In the rare instance where hand tools do not work, because of excessive engagement length, apply localized heat to nut or bolt to approximately 232 degree Celsius (450 degree Fahrenheit). Disassemble while hot.
For Reassembly
Remove loose product from nut and bolt.
Apply primer to all threads, regardless of metal type.
Assemble and tighten as usual.
Properties Of Uncured Material:
Chemical Type: Anaerobic Dimethacrylate Ester
Appearance: Opaque Blue Fluorescent Liquid
Specific Gravity, g/ml: 1.05
Viscosity @ 25 degree Celsius, mPas (cP): 800 to 1,600
Flash Point (TCC), degree Celsius (degree Fahrenheit): >93 (>200)