Loctite AA 352 Light Cure Adhesive 250 ml

Description

LOCTITE AA 352 is a transparent, amber, UV light/activator-cured, acrylic adhesive with good resistance to chemicals and high humidity. It is ideal for glass, metals and ceramics.
LOCTITE® AA 352 is a transparent, amber, acrylic adhesive cured by activator and UV light. It is designed for applications that require the prevention of uncured anaerobic adhesive migrating from the joint. Good resistance to chemicals and high humidity. Ideal for the tough bonding of glass, metals and ceramics. Fixture time is 10 seconds and service temperature is -40ºC to +150ºC.
Prevents uncured anaerobic adhesive migration
Cures on demand
Resistant to humidity and chemicals
Toughened bond
Ideal for glass, metals and ceramics
TYPICAL CURING PERFORMANCE
This product is cured when exposed to UV radiation of 365nm. To obtain a full cure on surfaces exposed to air, radiation at 250nm is also required. The speed of cure will depend on the UV intensity as measured at the product surface
Heat Cure
This product may be cured with heat. The bond area should be heated to 121°C and maintained at that temperature for 30 minutes.
Activator Cure
Apply LOCTITE® Activator 7075™ to one surface and the adhesive to the other, mate and clamp. The assembly will reach handling strength in approximately 4 minutes if the gap is small, full cure in 72 hours
Data expired but still working