Genuine Loctite 680 Retaining Compound Green 250ml

Description

A high strength, high viscosity room temperature curing adhesive used to join fitted cylindrical parts
Fixtures in 10 minutes and provides a shear strength of 4,000 psi
Capable of filling diametral gaps up to 0.015 in. (0.38 mm)
Allows relaxed machining tolerances, and replaces clamp rings, set screws, and snap rings
Gives best resistance to dynamic, axial and radial loads
Recommended for retaining shafts, gears, pulleys and similar cylindrical parts
Agency Approvals / Specifications
NSF/ANSI 61, ABS, CFIA Listed
Applications
For Slip Fitted Parts
Color
Green
Cure Type
Anaerobic Cure
Diametrical Clearance (Maximum) (in.)
0.015
Fixture Time
10 min.
Full Cure Temperature (°C)
25
Full Cure Temperature (°F)
77
Full Cure Time
24 hr.
Gap Fill (in.)
0.015
Key Characteristics
Strength: High Strength
Shear Strength, Steel (psi)
4000
Specific Gravity (g/l @ 25°C)
1.1
Temperature Range (°C)
-54 to 149
Temperature Range (°F)
-65 to 300
Viscosity (Brookfield mPa.s (cP))
4000
Viscosity Temperature (°C)
25
Viscosity Temperature (°F)
77
*
This is an anaerobic adhesive. Product is filled roughly half-full to leave air space in the bottle and provide
product stability